Bobcat 331E – fuse box diagram
Year of manufacture:
Fuse box
![](https://fuse-box-diagrams.com/wp-content/uploads/2023/01/Bobcat-331E-fuse-box.jpg)
No. | Amps [A] | Description |
1 | 5 | Windshield Wiper |
2 | 20 | Switchable Power |
3 | 25 | Alternator / power relay |
4 | 25 | Attach. control device |
5 | – | – |
6 | 25 | Air conditioning;
Fan heater. |
7 | 5 | Ignition |
8 | 25 | Fuel Solenoid Valve |
9 | 25 | Controller |
10 | 25 | Attach. control device |
11 | 20 | Lights |
12 | 15 | Accessory sheet |
Relay | ||
E | Switching power | |
F | Fuel Solenoid Valve | |
G | Lights | |
H | Glow plugs | |
J | Starter |
The excavator is equipped with a 12-volt negative grounded electrical system. The electrical system is protected by fuses located under the cover on the right side of the excavator (item 1). The fuses protect the electrical system in the event of an electrical overload. The cause of the overload must be determined before restarting the motor.
WARNING: Terminal and wire harness assignments for individual connectors will vary depending on vehicle equipment level, model and market.